Homemade video compilations - Page 6

I wanted a lightweight wood stove for my parateepee so ...
Posted by: envirosponsible

Video duration: 263 seconds
Global video hits: 52917

I wanted a lightweight wood stove for my parateepee so I made one from a small barrel and some duct work. The barrel is a used fastener keg and the chimney is 4" duct work. I've been using this stove for over a year or two now but I had to change the chimney since the once I was using was too short and too heavy.

Related: hot, stove, tipi, teepee, parateepee, camp, camping, winter, cold, weather, snow, survival, surviving, survived, survivalist, survivor, survivalism, dual, wild, vs, man, bug, out, bag, bugging, in, bob, shelter, tent, howto, how, to, homemade, home, made, diy, cheapest, easiest, lightweight, light, weight, cook, cooking, hygiene, heat, heater

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

A decent woodstove ...
By: TheChipmunk2008. on 20 May 12, 21:32:02
A decent woodstove can be? made almost clean burning (ie no smoke). I'm in southampton, (Smokeless zone) and considering installing one, gotta be cheaper than paying for gas!

Nice job ?
By: ppclicpl. on 17 May 12, 06:38:05
Nice job ?

cool stove i might ...
By: KidOutdoors14. on 15 May 12, 01:10:11
cool stove i might try to make one for? a tipi imma make once i get thick enough canvas

hurrah, you have ...
By: mckaywilliambrown. on 08 May 12, 05:35:54
hurrah, you have done a good thing. you have also? given me an idea for a smaller version.

woodmanspartsplus( ...
By: kgmetcalfe. on 26 Apr 12, 20:34:00
woodmanspartsplus(dot)com/4940/16301/Stove-Pipe-Black/Black-Stove-Pipe-24-inch-length?

your not exposing ...
By: kgmetcalfe. on 26 Apr 12, 20:24:22
your not exposing yourself to the zinc fumes - have you looked into the effects of zinc inhalation? and black pipe should be a heck of a lot less than the coated, only makes sense seeing as that step isn't needed. as? for life expectancy, should be the same - seeing as you have to burn off the toxic metal, that would place both in the same category - non coated pipe. right?

Is black pipe as ...
By: envirosponsible. on 25 Apr 12, 14:25:05
Is black pipe as inexpensive?? What does it matter anyway if I burn off the zinc?

should have gone ...
By: kgmetcalfe. on 25 Apr 12, 05:05:23
should have gone with the black pipe. not the stuff your using. black pipe all you need burn? off is the oil they used in the manufacturing process.

100% right,,that ...
By: StatenIslandPrepper. on 17 Apr 12, 16:18:09
100% right,,that baffle does nothing,, to? small

I used 2make a vat ...
By: sibalogh. on 16 Apr 12, 12:32:09
I used 2make a vat out of these barrels nd tiled it with 1" thick? fire-brick 4longevity, nd used 2last for at least 10years. if you did it like that the coating on th outside would have remained whereas this way it'll b consumed by rust soon.

In that? case great ...
By: dave777blaster. on 08 Apr 12, 21:49:02
In that? case great job !

Oh I see. ? Good ...
By: envirosponsible. on 08 Apr 12, 17:26:49
Oh I see. ? Good points though I made this project from materials at hand with minimal time and it works excellently for what it is.

up the chimney ...
By: dave777blaster. on 08 Apr 12, 06:03:43
up the chimney baffle should be? almost the size of stove and should be a lot heavier gauge steel. more control of air would also be wise.

Lost to? what?
By: envirosponsible. on 07 Apr 12, 21:31:05
Lost to? what?

80%? the heat is ...
By: dave777blaster. on 05 Apr 12, 01:18:51
80%? the heat is lost

Good point. One ...
By: envirosponsible. on 03 Apr 12, 14:04:19
Good point. One could be added in the? duct line. I passed this stove on to a friend so I'll let him know if he doesn't already.

This stove works ...
By: envirosponsible. on 03 Apr 12, 14:03:24
This stove works great when it's? not overloaded like in this video. Adding a flange to the door would be easy though the cool thing about this stove is that it works great with the door open. That way longer pieces of wood can be fed into it. Besides I passed it on to a friend.

You have way? too ...
By: Rustaholic777. on 31 Mar 12, 23:29:53
You have way? too many holes in that stove. Get another barrel so you can cut your doors larger than the holes.

you need? a damper ...
By: Ja72corbin. on 28 Mar 12, 21:48:44
you need? a damper in the Pipe!! Helps keep the stove hott and cuts the wood consumption !!

get rewarded for ...
By: serenasmith771. on 20 Mar 12, 12:29:16
get rewarded for your opinion! Go to onlinesurveysforrewards.info?

Nice ! Maybe a ...
By: phrankus2009. on 13 Mar 12, 08:19:49
Nice ! Maybe a brass coil insert for on-demand hot water ... at least to take the chill off of a gravity-fed shower supply ... As long as the reservoir is about 8ft higher than the shower head, it does not matter if you dip down low and run it thru a coil that is inserted thru the main (or top) door of the stove. ... Just need enough of a leader to? avoid any melting of fire or safety hazards. YOU may not care that much but I hear the ladies really appreciate a warm bath, on occasion.

Basically, you need ...
By: dedicateddad. on 13 Mar 12, 04:07:29
Basically, you need to: 1 redo your doors so they seal as tight as possible 2 raise the "grate" a bit so there's room for ash below 3 add an "ash door" BELOW grate so you can? clean it out even while burning 4 on the ash door include a damper - look at a "kettle" style charcoal grill to see how it's done. AWESOME effort, though!

Nice job man!?
By: houseoffire72. on 13 Mar 12, 00:48:40
Nice job man!?

Top end plasma? ...
By: bkkn2012. on 08 Mar 12, 17:50:08
Top end plasma? cutters and tig/stick welders @ Lotos! lotostechnology dotcom

Good work.?
By: IronHorse2007. on 06 Mar 12, 03:26:38
Good work.?

Homemade Tannerite From Instant Cold Packs
Posted by: Themanscave

Video duration: 320 seconds
Global video hits: 139901

For more info:themanscave.com A video on how you can make Tannerite from instant cold packs from your local drug store. And aluminum powder that can be found online.

Related: tannerite, exploding, targets, shooting, fireworks, boom, fire, homemade, explosives, howto, how, to, pyro, outdoors, hunting, fishing, high, power, aluminum, powder, guns, weapons, rocket, bottle, display, jumping, paintball, wildlife, nature, hiking, creature, cruiser, fps, environment, backflip, archery, stunts, wilderness, airsoft, camping, build, make, design, create, fix, instructable, hobby, hack, tutorial, diy, crafts, deer, thermite, how-to, cannon, bomb

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Yeah, blah, blah... ...
By: 55ONOX. on 21 May 12, 23:09:10
Yeah, blah, blah... let the legal experts figure it out. The point was/is very simple in that the OP claims he is making something he is not. Rename the title to "HOMEMADE BINARY EXPLOSIVE" and that would be more appropriate.?

blackpowder? and ...
By: jeremy keith. on 21 May 12, 18:20:02
blackpowder? and fert is better

You can make ...
By: thordark. on 17 May 12, 21:40:05
You can make alumimun power with? a blender and foil, there are some videos on here about it

Farm&fleet.... For ...
By: lennyball76. on 16 May 12, 18:42:45
Farm&fleet.... For agriculture? use only, of course.

ANYTHING? MORE ...
By: njmvermont. on 11 May 12, 15:03:59
ANYTHING? MORE COMMAN THAN ALUMINUM POWDER WORK.

that n a 22 is all ...
By: njmvermont. on 11 May 12, 15:03:02
that n a 22 is all ya? need man.

i am a member of ...
By: tracy471. on 11 May 12, 00:15:15
i am a member of your videos i think their great because i? dot have a lot of money but i can have a bow and fishing pole both for cheap great job thanks for helping the poor man enjoy the outdoor

Is this any cheaper ...
By: TheShermandale. on 03 May 12, 15:47:30
Is this any cheaper than the Star targets you can purchase at the hunting store for about $6? Cool vid,? though.

Buy in bulk. I buy? ...
By: zapityzapzap. on 30 Apr 12, 08:18:17
Buy in bulk. I buy? 10 lb of Al powder for $10/lb. I find instant cold packs at DG and Walgreens for as low as $1.25...each pack contains roughly 1/2 lb of AN. If you can find 34-0-0 fertilizer buy it, it goes for about 30¢/lb and theoretically 1 lb of AL is good to set off 39 lb of AN.

I LOLd SO? MUCH! ...
By: JohnWackoff. on 30 Apr 12, 04:36:02
I LOLd SO? MUCH! funny and true

just buy a shit? ...
By: BustedRecruit. on 29 Apr 12, 19:10:20
just buy a shit? ton of black powder and make pipe bombs like any other self respecting american

This is? crap it ...
By: litbeavis. on 28 Apr 12, 17:28:37
This is? crap it doesn't work

Umm, no. Copyright ...
By: drewdane40. on 28 Apr 12, 06:25:00
Umm, no. Copyright pertains to creative works, not products or trade names. At best, the use of the name Tannerite is trademark infringement, but that's? a stretch, too.

what did you set ...
By: MrGrfs. on 27 Apr 12, 02:51:20
what did you set it? off with

how? ?
By: fishblade2. on 27 Apr 12, 00:28:02
how? ?

I make pounders ...
By: zapityzapzap. on 26 Apr 12, 16:35:23
I make pounders for? about $4...

If you make a ...
By: zapityzapzap. on 26 Apr 12, 16:34:30
If you make a makeshift blasting cap for the fuse, then yes. It won't burn though.?

Can I use a? fuse ...
By: YexinSs. on 25 Apr 12, 01:48:58
Can I use a? fuse to fire it?

Target¡!!!!!!!!!,?
By: jacobgutierrez88. on 20 Apr 12, 21:10:50
Target¡!!!!!!!!!,?

So for about, what ...
By: richardsolak01. on 18 Apr 12, 21:04:24
So for about, what 8 dollars and? all that trouble I can get a half a pound of what you call, well you know. I can get a half pound can for $8.99 at my local gun shop, less in b ulk.

wait... hold on... ...
By: 3johnyk. on 18 Apr 12, 07:38:57
wait... hold on... i think you need to post? it again

Where do? you get ...
By: h3avysoundz. on 17 Apr 12, 23:38:29
Where do? you get the aluminium powder?

Great job and ...
By: ripfletching. on 17 Apr 12, 03:39:44
Great job and thanks for? no bad words !!

The only persons or ...
By: 55ONOX. on 17 Apr 12, 02:18:18
The only persons or companies allowed to use our trademarked name or sell binary exploding targets, are authorized distributors of Tannerite? Company

From the real ...
By: 55ONOX. on 17 Apr 12, 02:18:09
From the real TANNERITE website: You have been warned, and Tannerite accepts no responsibility for any website or individual purporting to have? a recipe for homemade Tannerite. We have spoken with and have on record, contact data to individuals who have in fact been injured by homemade exploding target recipes. The REAL patented Tannerite target is safe, stable, and can not be activated by anything other than a high powered rifle round.

Homemade CO2 Generator PART 1 OUT OF 2
Posted by: quaqa88

Video duration: 490 seconds
Global video hits: 334438

This is how to make a homemade carbon dioxide generator for your aquarium plants. Please comment. Make sure you watch part 2!!

Related: co2, homemade, generator, corbon, dioxide, aquarium, projects, diy, do, it, yourself, fish, tank

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

those fish seem ...
By: GrinD9301. on 22 May 12, 19:11:24
those fish seem pleased and it didnt cost? you 200 bucks, great job!

whoever is thinking ...
By: GrinD9301. on 22 May 12, 19:08:41
whoever is thinking about using this with weed plants: Dont. simply dont, its not worth dying? for a harvest thats a little better. more then 3% Co2 in the air will kill you and there have been dosens of marijuana growers who DID or NEARLY died this way, Some where lucky the cops bust them.

1:00 whatahead?
By: GaYZZe. on 10 May 12, 08:41:36
1:00 whatahead?

I made one these ...
By: skoalface. on 21 Apr 12, 23:14:59
I made one these recently however it? slows right down after about one day. Any suggestions? Thanks in advance.

cellular? ...
By: DrBlvckvpple. on 18 Apr 12, 19:41:06
cellular? respiration?

dude you just made ...
By: cdmc1984. on 14 Apr 12, 18:05:21
dude you just made liquor or ethanol something the chem reaction is sugar and yest beer thats why your air stone foams dude your fish are drunk keep up the good work though alway push forward?

you? dont need one, ...
By: TheAsianVids. on 28 Mar 12, 02:36:59
you? dont need one, as long as the tube isnt in the water

This didn't work? ...
By: TheConfuzzled12. on 04 Mar 12, 22:44:35
This didn't work? for me!!!! And I made sure I followed all the correct instructions!!! It still did not work. I'm mad D:

thanks? man, that ...
By: madeinamsterdam420. on 21 Feb 12, 18:43:21
thanks? man, that is cool!

2:59 Mother ...
By: MrDrak3f. on 20 Feb 12, 15:21:33
2:59 Mother checks Dexter ?

where is the? ...
By: erntam1990. on 14 Feb 12, 11:20:05
where is the? second filter bottle?

I can make one..... ...
By: ismiboy. on 13 Feb 12, 02:54:30
I can make one..........But I don't have the time to? make one

me too...? lol
By: shad0w9. on 05 Feb 12, 05:12:00
me too...? lol

Great video...very ...
By: cojmasterk. on 04 Feb 12, 22:41:17
Great video...very informative. I have a 75 gallon tank, and have been researching into home-made and buying CO2 canisters. I'm gonna give this home-made version a shot, and? do 5 soda bottles with 5 tubes merging into one tube.

He sounds pretty ...
By: kaiuycn. on 28 Jan 12, 12:29:41
He sounds pretty young, probably 12-14 ish... so that's pretty? normal... Why you hating?

Bubbles are getting ...
By: MegaLiz1973. on 24 Jan 12, 14:52:49
Bubbles are getting to the top too quick yr getting no diffusion at all, try pulling yr line into a powerhead to make the bubbles smaller so u get more diffusion? into yr tank .

Thank you!! I ...
By: PYMOMMY. on 21 Jan 12, 07:51:55
Thank you!! I learned a whole lot from your video. I? will be making my own CO2 generator this weekend.

well done kid. Im ...
By: Th3RedneckBadger. on 20 Jan 12, 00:26:18
well done kid. Im lookin to start? puttin Co2 into my tank. Thanks.

when do u need? to ...
By: respect4z. on 17 Jan 12, 21:27:31
when do u need? to replace the solution?

That this approach ...
By: koutaku003. on 17 Jan 12, 19:36:13
That this approach will have three weeks. 500ml bottles,Water 400ml,100g sugar,2g baking soda,Appropriate amount of dry yeast.How to make. Poured into Bottle with a baking soda and sugar, add water, and? the cap and mix by shaking. Introducing an appropriate amount of dry yeast, mix? by? shaking again. Very easy, quick and you can.

ok one this kidd is ...
By: medatron007. on 17 Jan 12, 07:56:58
ok one this kidd is a big time NERD he soulds like he has the flu and has never gotten pu**y ?

Will it? work 4 ...
By: davidlee2017. on 15 Jan 12, 04:02:32
Will it? work 4 paintball

*hears? voice*ARGH ...
By: bobcheese427. on 12 Jan 12, 20:32:13
*hears? voice*ARGH not you again! *stops watching*

How much PPM of? ...
By: kylvinder. on 12 Jan 12, 20:09:15
How much PPM of? CO2 will this produce for, say, a 60 cubic foot area?

Hey how long? ...
By: Miguel198328. on 11 Jan 12, 03:57:24
Hey how long? before u start seeing progress ...

Survival skills - Homemade Candles 101
Posted by: survivalistboards

Video duration: 344 seconds
Global video hits: 26126

www.survivalistboard s.com Homemade Candles - that is what my wife and I were making this past weekend. We used pint and half pint jars along with 6 inch long wicks to make about 30 candles. candles Homemade arts crafts hobbies urban survival disaster preparedness

Related: candles, homemade, arts, crafts, hobbies, urban, survival, disaster, preparedness, survivalist, survivalism

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

were did u buy the ...
By: 3hollye61. on 02 May 12, 17:18:12
were did u buy the candle? fragrances from ...and the wax

x2 on where to buy ...
By: TheCrazyphuck. on 21 Jan 12, 02:19:15
x2 on where to buy wax in bulk?

I have? been ...
By: TripInsure. on 20 Jan 12, 20:46:48
I have? been wanting to make candles.

where do you buy ...
By: heidbrain. on 15 Dec 11, 21:45:27
where do you buy the bulk wax and? the die ?

is that paraphen ...
By: Ariakas7708. on 20 Nov 11, 08:03:16
is that paraphen wax or however you spell it? thats what i have, and im afraid to heat it that way because it seems the wax is still directly on the burner even though? theres 2 pans But do us straight paraphen wax or a mixture of beeswax?

where do u find? ...
By: pamclark1965. on 06 Nov 11, 15:48:19
where do u find? wics??????????i wish they would respond to our questions!!!

where do u find ...
By: pamclark1965. on 06 Nov 11, 15:45:53
where do u find wics?????????? ?

I like container ...
By: msKCleigh. on 19 Sep 11, 13:57:36
I like container candles because they hold more fragrance and the jars? are refillable. Less messy.

@cynan48 But? soy ...
By: msKCleigh. on 19 Sep 11, 13:53:23
@cynan48 But? soy doesn't smell as good.

Making them? too ...
By: msKCleigh. on 19 Sep 11, 13:47:48
Making them? too thick?

looks? like lone ...
By: msKCleigh. on 19 Sep 11, 13:44:33
looks? like lone star

You can heat the ...
By: msKCleigh. on 19 Sep 11, 13:43:08
You can heat the jars up and take the wick out....it's only hot glue holding the wick down. Looks to me like she used a 6? inch wick clip assembly and her supplies look like they are from Lone Star Candle Supply.

i LOOOOOVE the ...
By: alexandriatrejo. on 16 Sep 11, 23:46:00
i LOOOOOVE the color! Where does she get her scents & colorings??

how? about just buy ...
By: juki0h. on 31 Aug 11, 06:05:50
how? about just buy alot of candles

good vid? guys :)
By: 85bigred250. on 08 Aug 11, 14:45:13
good vid? guys :)

where do you get ...
By: luvbites23. on 02 Aug 11, 03:31:13
where do you get all the? wax, coloring, and scent for the candles?

A little bit of an ...
By: JeffreyRodriguez. on 22 Jul 11, 20:26:55
A little bit of an old video, but it's important to note: It's not so much a matter of glass thickness. Mason jars are made of soda-lime glass, which doesn't tolerate heat shock well. You may not have cracked any jars, but? you may have stressed them. Just slowly warm them up to the same temperature as the wax before you pour and you'll prevent any problems. Great videos as always.

What kind of wick ...
By: pablojunior97. on 30 May 11, 15:08:11
What kind of wick do you? use?..

This is a great ...
By: 1bornsurvivor. on 22 May 11, 13:10:57
This is a great video for a man that has never done many arts and crafts things. How many hours does one of your small mason jar candles burn? If I knew that, I could determine how many I would need to have a three year supply. You did not cover the wicks or the silver in color wick weights at the bottom of? the jars, in this video. If I glued the wick weights to bottom of the inside of the jar, would I be able to remove it so that I could clean and reuse the jar for future candles?

I love your as I? ...
By: rmbb10. on 11 May 11, 05:29:23
I love your as I? call it "just do and go with the flow" approach; very straight to the point and "git it done".

it was nice but u ...
By: kavya99ful. on 09 Feb 11, 12:02:41
it was nice but u should have shown how it? looks after taking it out

you did to?
By: Huffdev. on 11 Dec 10, 04:10:39
you did to?

i want to make my ...
By: Thesethlans. on 09 Dec 10, 19:16:00
i want to make my own? candles but that wax is so expensive in my area.

Thank you for the ...
By: NatalieJanine. on 02 Sep 10, 22:14:52
Thank you for the video.? It was simple and to the point. Very helpful. :)

if you use beeswax ...
By: aglover0099. on 06 Aug 10, 23:56:05
if you use beeswax its much? helpful

Scientific Tuesdays - Make a Homemade Light Bulb.
Posted by: HouseholdHacker

Video duration: 256 seconds
Global video hits: 309914

Light bulbs are a fairly simple invention and we can create our very own using some common household items. All you need to light up your day is a pencil lead, some batteries and a bit of wire. Follow along and we'll show you how. You can follow Householdhacker on Twitter at twitter.com or Dylan at twitter.com Thanks to Audible! Go get your free audiobook at Audiblepodcast.com

Related: pencil light bulb, homemade light bulb, diy light, how to make a light bulb, howto, simple science tricks, science experiments, householdhacker, scientific tuesdays

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Well typically an ...
By: darkeye1611. on 20 May 12, 13:09:31
Well typically an inert gas is used within the bulb, however it's not necessary to generate light.? It is necessary, however to improve the bulb efficiency in terms of life span and bulb blackening, the gas helps cool the filament in the bulb allowing it to burn longer. This as a result increases bulb life span, and reduces blackening of the glass.

don't you need? ...
By: rob8675309ain. on 19 May 12, 01:18:39
don't you need? orgon gas?

What if you vacuum ...
By: svartahridxhgc. on 18 May 12, 07:03:43
What if you vacuum the jar ? (just like regular bulbs) I think the result will be interesting. I know two methods to create vacuum, the first one is connecting hermetically an aquarium hose to the jar cap, make vacuum with your mouth and clamp the hose with a C clamp ( we? can create strong vacuum with out mouths :P). The other option is putting inside the jar a little bottle cap with alcohol in order to start a little controlled fire inside the jar, it will consume the oxygen making vacuum.

Thumbs up if you ...
By: Aslesha1999. on 13 May 12, 13:03:44
Thumbs up if you watched the entire video but? did not try this.

She's not "The ...
By: ginaiswin. on 04 May 12, 07:56:21
She's not "The Serenity", it's just "Serenity" :P (I watch Firefly waaaaaay? too much xD haha)

yes? i do -_- tis a ...
By: coreylawd. on 27 Apr 12, 23:51:11
yes? i do -_- tis a space ship the "serenity" from a TV show

You aparently don't ...
By: IR591620. on 27 Apr 12, 23:30:34
You aparently don't recognise the reference.?

trollll?
By: coreylawd. on 15 Apr 12, 20:04:56
trollll?

Yeah, Neon? lights, ...
By: Melourn. on 15 Apr 12, 19:52:00
Yeah, Neon? lights, those were what I was thinking of. I saw a neat demonstration of it when I was in the 8th grade.

I don't think you'd ...
By: ginaiswin. on 15 Apr 12, 18:19:04
I don't think you'd be able to fit a whole spaceship in? a jar...

it would reduce the ...
By: nurdsmart. on 15 Apr 12, 07:38:51
it would reduce the oxidation of the graphite filament so the graphite will last longer. but i'm not sure if it will affect the colour, usualy that happens in a discharge tube when a high voltage is placed through a noble gas (neon sign).?

What would that do? ...
By: Melourn. on 14 Apr 12, 06:05:02
What would that do? I remember something about color changes due to what gasses are used in some light bulbs...but I? can't remember much about it.

fill the jar with ...
By: nurdsmart. on 14 Apr 12, 04:46:24
fill the jar with a? noble gas like helium

untill you notice ...
By: TheLegobot. on 13 Apr 12, 00:46:55
untill you notice it is dead the? next day

You? need more amps ...
By: ciarangordon. on 12 Apr 12, 18:41:44
You? need more amps LESS VOLTS

How long do? one of ...
By: jake4573. on 12 Apr 12, 00:23:53
How long do? one of these usually last?

use a flash light ...
By: RunescapeProMember. on 11 Apr 12, 03:09:12
use a flash light dumass?

Fuck you Thomas ...
By: ibesweetp2. on 10 Apr 12, 18:40:29
Fuck you Thomas Edison?

Ok, I now know what ...
By: TheMa5termind. on 10 Apr 12, 02:12:01
Ok, I now know what to do with that? old back room. I will use it as a lab.

NOT THE FIREFLYS IN ...
By: coreylawd. on 08 Apr 12, 12:09:18
NOT THE FIREFLYS IN MY? HOME MWAHAHAHAHA

(multiple fireflies ...
By: TheGibberishGuy. on 08 Apr 12, 11:44:33
(multiple fireflies may? be needed)

The end was kind ...
By: Mrwiseguy101690. on 07 Apr 12, 18:52:21
The end was kind of? awkward :/

no because water ...
By: colinhall87. on 05 Apr 12, 23:37:43
no because water wouldnt? burn and therefore wouldnt produce light

at least he has a ...
By: Mindfulhacker. on 04 Apr 12, 19:57:46
at least he has a penis,? unlike you

what do? you mean ...
By: girlieadds. on 02 Apr 12, 22:57:45
what do? you mean you wouldn't want to get a girl friend wait i forgot you can't you to geeky! responed if you like

Homemade camper trailer
Posted by: BanjoSpecial

Video duration: 335 seconds
Global video hits: 108890

step by step pic.of our camper build finished 08/08 it was a lot of fun to build and more fun to use.

Related: homemade, camper, tt, rv, travel, tralier

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Really nice? job
By: Kilooscarromeo. on 04 Apr 12, 23:57:24
Really nice? job

No, you don't need ...
By: Kilooscarromeo. on 04 Apr 12, 23:57:07
No, you don't need a permit. But,? when it comes to electrical work consult an electrician well worth the effort.I live in Canada, Alberta, here when you register it is a 1 time registration presently $110.00.which really isn't bad unlike vehicles which is absolutely pathetic the yearly pilfering.

nice job. im? ...
By: zakosutra. on 29 Sep 11, 20:04:28
nice job. im? planing to build my own :)

nice job. im ...
By: zakosutra. on 29 Sep 11, 20:04:16
nice job. im planing to build my own :) ?

this is a caravan ...
By: nicadela. on 25 Sep 11, 22:28:26
this is a caravan not a camper trailer, was dissapointed when I started watching? it thought its a camping trailer

Man, thats ...
By: ebertmadwoman. on 11 Sep 11, 09:38:36
Man, thats fantastic. Did a great? job.

what did you use to ...
By: alec4672. on 31 Aug 11, 19:33:50
what did you use to get hot water in? the camper?

Just finish putting ...
By: EFFINHILMER. on 09 Jun 11, 01:04:16
Just finish putting the? last wall up, DAMMIT, we forgot to cut the hole for the door out, lol

hey nice job,,, i ...
By: alexisramirez1978. on 02 Jun 11, 03:42:25
hey nice job,,, i have a question,, did you get some permit to do this work? because I want? to make my own camper trailer, but I need to know if I need some permit for construction? thanks

so you wanted to ...
By: BanjoSpecial. on 25 May 11, 12:53:21
so you wanted to see a 15 min video? instead of a 5 min with the same out come?.

Wow,? it's almost ...
By: Livinggreen100. on 25 May 11, 02:35:05
Wow,? it's almost as if you: worked as an assembler at an RV builder that went bancrupt in our most recent downturn, bought up some of the pre-assembled wall and RV furnishings of that liquidation, and then brought them home and put them together and filmed this implying you built it from scratch. Since your pics don't actually show the construction of the components, one might, just might, think that. But, but, we all know that's just silliness.

Hi, it looks ...
By: 64jorthom. on 02 May 11, 14:43:41
Hi, it looks impressive, insulation is very good for those hot and cold days. I transformed a Chevy P-30 with? a shower, had an electric gen set, hot water shower head, roof air conditioner, a water faucet aoutside for hand cleaning. I use it to go around and make mechanic and welding work. I removed the paint and repainted from bare aluminum. My bath was too small, but taking a shower by the mountains is unforgotable. It took about $25,000, I loved it!

thats awesome! ...
By: ncprerunner. on 23 Apr 11, 22:30:37
thats awesome! great job! ? you guys are very ambitious people.

this thing is so? ...
By: crazypoopnscoop. on 05 Apr 11, 21:55:31
this thing is so? awsome. btw how much do you think it all cost in total?

just change the ark ...
By: BanjoSpecial. on 15 Jan 11, 02:41:34
just change the ark on the trusses?

How did you make ...
By: cscholl2223. on 14 Jan 11, 16:18:20
How did you make the transition from the rounded section of the roof back to a flat near? the front of the roof?

My Father, Paul ...
By: stormee1st. on 21 Dec 10, 06:16:30
My Father, Paul Lehman Carnell the designer builder (inventor) of the worlds first Telescoping travel trailer would really like the information sharing part of this. His story and prototype photos can be seen at the RV/MH Museum Hall of Fame in Elkhart Indiana. His TOW LOW inspired every type of slide-out seen today and? was truly made to be green before green was popular. He was a humble and brilliant man who was ahead of his time. Keep learning and sharing your ideas!!

fixed a few? thats ...
By: BanjoSpecial. on 05 Dec 10, 01:55:54
fixed a few? thats all

are you experienced ...
By: mormon2LDS. on 04 Dec 10, 09:31:11
are you experienced with built on RV or? you used worked for RV factory ?

all I can say is ...
By: gerard12668. on 05 Nov 10, 10:41:29
all I can say is WOW Good job...come to Australia and make? me one

wow that is so cool ...
By: johndeere3009. on 22 Oct 10, 22:14:57
wow that is so cool I? love the camper! It looks fantastic!!! thumbs up!

play it? backwards ...
By: mustie1. on 07 Sep 10, 22:33:59
play it? backwards and it looks like you took apart a new camper

wow guy's Im really ...
By: mortie806. on 05 Sep 10, 05:44:50
wow guy's Im really impressed that's amazing you did a great job at first i would? of never of guessed you built that. kinda of gave me ambitions to fix mine

Holy crap!! That's ...
By: mydejavooo1. on 04 Sep 10, 05:24:16
Holy crap!! That's freaking AWESOME!! I'm totally impressed by your attention to detail, and I would NEVER have? guessed that you made that from scratch. Did you used to work in a trailer manufacturing plant?? And just how long did that take you to build? Hats off to you my friend!! :)

? I made trusses ...
By: BanjoSpecial. on 01 Sep 10, 12:02:38
? I made trusses from ripping furr 2x4 in to strips(lighter) on your trailer being they used full 2x4s Id stay with that.But use furr.

Homemade Vertical Axis Wind Turbine
Posted by: batfink009

Video duration: 291 seconds
Global video hits: 469959

Catching the power of the wind its free

Related: wind, turbine, free, energy, windmill, homemade, windrad, spinning, power, science, technology, environment, creative, green

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Im attempting to ...
By: cosmicbrotha. on 19 May 12, 12:14:24
Im attempting to gather? information on vertical axis wind turbines.. I wish you were speaking and possibly informing us about output.. the music is distracting but of course the sound can be cut off.. which video would you suggest I view and where to look for more info..

my friends ...
By: ricardojp07. on 09 May 12, 19:11:46
my friends INVENTORS, HAVE YOURS SEE MY INVENTION OF DIESEL MOTOR 2 STROKES BY VAL VES THAT SAVE THE? 30% OF FUEL?

good, then people ...
By: bosdad7. on 05 May 12, 19:03:58
good, then people can watch the? other vids with proof here on youtube and not listen to clowns with no education.

all I can say is ...
By: bosdad7. on 05 May 12, 19:02:49
all I can say is WOW ! you are one special type of know? it all person. have a great day !

Did you watch the ...
By: Davekyguy132. on 05 May 12, 15:36:18
Did you watch the video? Turbines missing blades, turbines falling apart. Power companies don't pay for turbines because it is a bad business decision. Most turbines are put up with taxpayer funds. Most turbines produce 25% of what the salesmen promise, and when people donate money to their utility for green energy only 15% of that money is spent on green energy. I don't doubt you build the useless crap, that's? why you defend it. Go to Heritage.org and search wind solar.

I have a degree in ...
By: Davekyguy132. on 05 May 12, 15:24:11
I have a degree in Electronics and a Degree in Industrial Electricity and I call BULLSHEET on your claims. You can ramble all you want and some idiots will believe your crap but you won't power more than light bulbs with what you have. It is not possible to get over? 3,000 Watts it takes to run an a/c unit or water heater much less the 2,000 watts it takes to run an oven with your puny setup. I refuse to waste my time with your nonsense anymore.

I have three small ...
By: bosdad7. on 05 May 12, 12:49:47
I have three small one's myself. I would be happy to disconnect them and let you pay for the power that would have been provided. just like any other industry, there will always be companies that sell crap, and foolish politicians that will? give away your tax dollars for it. you cant blame the industry, you have to blame the uneducated consumer. you should watch a few more youtube video's that record there out put and wind speed's before you just assume that all wind power is a pipe dream.

Wind power is a ...
By: Davekyguy132. on 05 May 12, 04:32:13
Wind power is a joke. Most states don't even have enough wind to make it feasible, look at the wins zone map. If you had looked up the article I sent you would see the countries that bought into it aren't getting returns for their money. Pipe dreams,? that's all wind power is.

The? truth is out ...
By: x8267264739. on 01 May 12, 22:05:29
The? truth is out there.

turbine's are ...
By: bosdad7. on 28 Apr 12, 22:53:45
turbine's are periodically shut down for heat and when power isn't required. most turbine's are privately funded or put up by power companies. so what tax dollars are you talking about ? It bothers me when people talk without having proof or knowledge of what they are really talking about. thanks for showing how little people really? know about how things work. by the way, I build turbines for a living.

obviously you have ...
By: bosdad7. on 28 Apr 12, 22:39:05
obviously you have no clue what your talking about. yes there are scamers, and there are guys that do the real work and figure it out. keep paying your electric bill, that way the? electric company wont mind me putting power back to the grid for you to pay for.

do you have any? ...
By: bosdad7. on 28 Apr 12, 22:36:47
do you have any? readings such as wind speed and voltage ?

This is what ...
By: Davekyguy132. on 27 Apr 12, 18:52:47
This is what happens to wind farms after the tax dollars are spent.. Put this in the? youtube search box xiX7Bn0lKRg

Cool, charge those ...
By: Davekyguy132. on 27 Apr 12, 18:37:15
Cool, charge those batteries for a month with that occasional? breeze and you can have light for 5 minutes. Wind power is a joke. Google this, then click on the UK daily news article. wind-power-industry-greatest-scam-age

They? look like ...
By: MrTpengineer. on 24 Apr 12, 00:43:57
They? look like halves, but yes 1.3 is better because of the drag along the sides :)

Thanks for your ...
By: thisissoeasy. on 21 Apr 12, 06:21:27
Thanks for your effort, but, this video? was all over the place... I can't remember am I coming or am I going? What was I actually trying to see here.....

Are those 1/2 PVC ...
By: NaDopros. on 15 Apr 12, 12:48:45
Are those 1/2 PVC pipes? Or, are they 1/3 ? Someone mentioned that cutting PVC pipe into "thirds" offers? less drag (resistance), than just cutting them in half.

check mine? ground ...
By: ZEINSTAIN2011. on 26 Mar 12, 03:51:27
check mine? ground turbine!

If you? want people ...
By: jimkoenig400. on 13 Mar 12, 16:50:55
If you? want people to watch your video... why would you play sould that drives them away.

Do you? have plans ...
By: icedbreaks. on 09 Mar 12, 04:45:57
Do you? have plans for this one?

If he is not ...
By: Zardoz5280. on 03 Mar 12, 02:34:41
If he is not drawing a lot of current it won't matter. He may just want ac long operating time and is? content with a slow change, as that turbine would only produce.

Do you make these ...
By: babyoftheuniverse. on 10 Feb 12, 14:22:14
Do you make these and? sell them? Or can you make a schematic diagram for a good price? Has to be 100% accurate please. LMK if you can do this, ty!

youtube.com/watch?v ...
By: toratora00008. on 01 Feb 12, 11:13:46
youtube.com/watch?v=I16UbbaO7Q4?

What the loud? ...
By: Ugandangirl. on 29 Jan 12, 21:31:48
What the loud? music???

WORLD RECORD: ...
By: TheServiceWeb. on 12 Jan 12, 02:08:36
WORLD RECORD: BIGGEST WIND TURBINE Visit: windturbinecarriedbywheels.weebly.com ZERO-NOISE from gears and generators since they're sealed underground. SAVES THE BIRDS AND BATS since the turbines are slow-moving. DOES NOT NEED TO OCCUPY A WIDER LANDSCAPE since the turbine can be very tall. MAY BE LOWER-COST since it can use parts of junked trucks and others. ELUDES HURRICANE FORCE since the blades automatically close. HELPS THE WIND ENERGY COMPANIES since it is? FREE FOR ALL.

Homemade Pasta Dough a la Uncle Bill
Posted by: foodwishes

Video duration: 368 seconds
Global video hits: 79690

Check my website, foodwishes.com, for the full story, recipe ingredients and more details. Enjoy!

Related: pasta, fettuccine, italian, chef, john, foodwishes, recipe, cooking, cook, culinay, food, allrecipes, recipes, homemade pasta dough, pasta dough, how to, how to make, how to cook, make, learn, dough, easy, simple, delicious

Display Video Comments | Hide Video Comments | Add Comment

Homemade NERF pistol.
Posted by: asciimation

Video duration: 326 seconds
Global video hits: 161513

This is my homemade NERF pistol. More details about it's construction can be found here: www.asciimation.co.n z This is my first attempt at building such a toy. It works fairly well. The range is much greater than a standard toy NERF gun (such as the Maverick). If you want to know more about Bender, he is here: www.asciimation.co.n z And the TARDIS is explained here: www.asciimation.co.n z

Related: nerf, homemade, bender, tardis

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

U should? sell ...
By: lash5501. on 08 May 12, 02:52:25
U should? sell these I would buy one

Oh mannnnnnnnnn I ...
By: darkprecurser. on 07 May 12, 05:34:31
Oh mannnnnnnnnn I would give anything to have a nerf pistol like this because pe play? what is essentially one in the chamber. It would definitely give you and advantage!

are u rich?
By: NERF MODDER. on 06 May 12, 15:16:08
are u rich?

Can i buy it i give ...
By: m1x3dr. on 05 May 12, 06:11:42
Can i buy it i give u? 1000dollar

better than my gun ?
By: Pham Nguyen Duy Nguyen. on 29 Apr 12, 11:36:43
better than my gun ?

looks cool, a ...
By: 1thetorchman. on 02 Apr 12, 21:08:23
looks cool, a question: can i also make this but then with a bigger? spring and shoot paintballs at decent range? just for fun not for real field games.

nice ?
By: hwninja92. on 01 Apr 12, 06:43:29
nice ?

brittish?
By: aeronca46cheif. on 15 Mar 12, 01:00:25
brittish?

this? is FROM MAKE ...
By: TheVopi. on 06 Mar 12, 01:30:19
this? is FROM MAKE MAGIZINE

yeah but homemades ...
By: pyrobny. on 01 Mar 12, 01:22:25
yeah but homemades are usually not only better, but cheaper. especially for non american countries.?

looks like a nambu?
By: MGshooter1234. on 24 Feb 12, 17:48:59
looks like a nambu?

its? pronounce (all ...
By: driggermarc. on 22 Feb 12, 14:27:18
its? pronounce (all-lu-mi-num)

Are you an absolute ...
By: torrentiuscampeaux. on 17 Feb 12, 16:15:43
Are you an absolute retard? Oh wait, you just live in the United States. American English is the only place in the world that pronounces it that way.? Go back to school and relearn the language you apparently believe yourself to be fluent in. The OP is obviously from a British colony, and thus speaks a variant of British English.

lol bender from? ...
By: nerfrocks99. on 16 Feb 12, 02:36:58
lol bender from? futurerama!

its called an ...
By: AlexNerfMods. on 09 Feb 12, 20:30:40
its called an accent. Jesus!? not everyone pronounces everything like you!

aluminum. not? ...
By: Nogorn. on 09 Feb 12, 16:31:49
aluminum. not? alyunimium

same here but some ...
By: harropizza. on 09 Feb 12, 10:01:09
same here but some people just like to make their? own

dude,you can buy em ...
By: 8IIllD. on 03 Feb 12, 02:16:28
dude,you can buy em for? 9.99 US

nice video i want ...
By: mrlegonerf. on 31 Jan 12, 09:33:23
nice video i want that gun, how much did? u spend on it (materials)?

Doctor? who box. ...
By: Peyto23. on 31 Jan 12, 05:53:05
Doctor? who box. And bender nice

Are u from new ...
By: MrSamboJambo. on 30 Jan 12, 08:11:26
Are u from new zealand? i know that? accent anywhere!

Omg u have? a TARDIS
By: jfrorigami. on 29 Jan 12, 12:13:38
Omg u have? a TARDIS

makemagazine 29 ?
By: 941gregor. on 25 Jan 12, 05:32:30
makemagazine 29 ?

Nope. He wrote an ...
By: forfudgessake. on 24 Jan 12, 15:17:54
Nope. He wrote an article on the build in Make Magazine. The compression chamber is just a piece of pvc and the piston inside of? it is a piece of machined cutting board with an O-ring bolted to a brass rod. The entire build was done with scrap and some hardware

no he used an air ...
By: rangask8er. on 24 Jan 12, 05:49:35
no he used an air compression chamber (the bke pump) nad modified it so it would? shoot nerf darts

Homemade Steak Fajitas Recipe - Laura Vitale - Laura in the Kitchen Episode 381
Posted by: LauraVitalesKitchen

Video duration: 619 seconds
Global video hits: 40044

To get this complete recipe with instructions and measurements, check out my website: www.LauraintheKitche n.com Official Facebook Page www.facebook.com Twitter: @Lauraskitchen

Related: steak fajita recipe, how to make fajitas, how to make a fajita, chef laura vitale, chef vitale, chef laura, homemade fajita, recipe, recipes, cooking, kitchen, fajita, fajitas, fagita, food, cook, restaurant, chicken, vegetarian, dinner, meat, bbq, cuisine, healthy, steak

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

your husband and ...
By: UrSoNotRandom. on 23 May 12, 01:48:53
your husband and kids (if u have any) are? soooo damnnn luckyyy :D

Now i? want taco ...
By: Adnilsanch. on 17 May 12, 06:03:52
Now i? want taco palenque

fake.?
By: marbalie. on 13 May 12, 21:05:25
fake.?

what?
By: hotmail32112. on 13 May 12, 16:14:16
what?

I bet Laura? shaves ...
By: Joe Vitale. on 12 May 12, 22:35:44
I bet Laura? shaves twice a day.

love your videos i? ...
By: PinkKandyy. on 12 May 12, 08:24:45
love your videos i? just hate how hungry i get afterwards

you? shoulda folded ...
By: jeghetervictoria. on 11 May 12, 03:15:25
you? shoulda folded the ends

laura you gotta? ...
By: mannyamaya. on 10 May 12, 00:58:50
laura you gotta? try this with homemade tortillas... not exactly health food though

too much? talking ...
By: bimovidia. on 09 May 12, 02:12:59
too much? talking dude!

And we Americans ...
By: URbrainONska. on 08 May 12, 18:15:40
And we Americans love you for it ?

Ye we danish? ppl ...
By: thenicelyman. on 08 May 12, 14:49:10
Ye we danish? ppl love cheese

I've tried this? ...
By: ashsister. on 07 May 12, 06:27:16
I've tried this? recipe yesterday but with chicken.. it was sooo delicious! Thanks Laura!

Sushi?
By: matteosmoove101. on 07 May 12, 02:33:09
Sushi?

I agree.. please ...
By: kemaladewi2. on 06 May 12, 18:16:55
I agree.. please make sushi rolls :D :D I requested this a while ago? and got top comment.. but still haven't seen the video.. pleeeaaase Lauraaaaa ^^

you're supposed to ...
By: yvettey0223. on 06 May 12, 17:53:54
you're supposed to cook the tortilla!?

Is that a bruise on ...
By: ZakashiXSunspirit. on 06 May 12, 09:33:09
Is that a bruise on your? forehead? >>?

Why aren't you on ...
By: buns72205. on 06 May 12, 06:23:44
Why aren't you on the food network? Have you looked into? that?

I love? this! I'm ...
By: vvariel89. on 06 May 12, 02:29:23
I love? this! I'm eating it as I type! It's so good

YUMMM-*BITE*? * ...
By: TheDarknessOfVoid. on 06 May 12, 00:11:29
YUMMM-*BITE*? *NOMNOMNOM* mMMMM THIS GOOD *MMFMG*

okay well i guess ...
By: Ashenix. on 05 May 12, 23:07:52
okay well i guess YOU can't make any other food other then your own mexican food because if you try to cook others, you're not making traditional food. :) why don't you post a video and show us? and then i'll? get a real mexican to go and judge it

In what conceivable ...
By: URbrainONska. on 05 May 12, 18:19:20
In what conceivable way am I? being anything but nice

Buenisimasssssssss ...
By: chulita126. on 05 May 12, 16:54:01
Buenisimasssssssss las ise? y Salerno deliciosas :)

love it that you ...
By: RetardedBeautys. on 05 May 12, 16:19:25
love it that you first started to show us how? to cook italian food, american and now mexican!

Well be nice ?
By: icemom09. on 05 May 12, 06:41:43
Well be nice ?

What, I'm? calm....
By: URbrainONska. on 04 May 12, 06:48:45
What, I'm? calm....

Homemade Sawmill- Upclose video
Posted by: trucknut324

Video duration: 382 seconds
Global video hits: 55170

Latest comments made on this video:

surplus center ?
By: trucknut324. on 21 May 12, 23:41:39
surplus center ?

Where did you get ...
By: hansojoe. on 21 May 12, 22:44:56
Where did you get your 1 in. keyed? shafts?

look at my? other ...
By: trucknut324. on 20 May 12, 16:45:43
look at my? other video

Why didn't you show ...
By: Nabokov50. on 20 May 12, 01:09:34
Why didn't you show it cutting??

the track, then? ...
By: trucknut324. on 07 May 12, 15:03:42
the track, then? worked to the frame then the drivetrain

Where did you start ...
By: Mcvicpel. on 07 May 12, 14:50:15
Where did you start to build? The? frame, the bandsaw blade, the motor?

Beautiful. Makes? ...
By: jubjub223. on 09 Apr 12, 03:43:53
Beautiful. Makes? me miss my dad.

weight? of the ...
By: trucknut324. on 27 Mar 12, 11:41:28
weight? of the carriage

Do you have ...
By: dcerdman74. on 27 Mar 12, 05:20:22
Do you have anything keeping the v-groove casters on the? angle iron, or is the weight of the carriage keeping the casters on?

cross tube size of ...
By: trucknut324. on 23 Mar 12, 16:15:54
cross tube size of ours is 3 inch but 2.75 will work too. we went to local steel yard? to find the best fit for the 2 tubes. you can also put some weld on the male tube and grind it flat to make the fit better. the best fit between the 2 tubes all depends on wall thickness of the steel

flat to within a 1/ ...
By: trucknut324. on 23 Mar 12, 16:04:22
flat to within a 1/32 inch as? long as you have a sharp band

ok got started ...
By: randall holcombe. on 23 Mar 12, 15:54:24
ok got started today on the mill ,had a? friend hat had a pacemaker put in and cant weld anymore so he gave me enough metal to build all the mill. bad for him good for me. so i will be asking alot more ? if thats ok? on the square tubing thats weldd to th uprights that goes from side to side is tha a 3 inch or 2 3/4. and what size goes inside of that for the tension.

How flat are your ...
By: 777strongcoffee. on 20 Mar 12, 02:13:08
How flat are your cuts? - just looking for a point of reference to see what expectation I? should have for my own home made bandmill.

what is the ...
By: randall holcombe. on 18 Mar 12, 18:37:49
what is the thicknees of the square tubing that goes across from side to side that has the one that slides in and out. what kind of hinge did you use? to set the toe? sorry for all the ? just want to get it right the first time.

I've seen just ...
By: charliemor3. on 17 Mar 12, 17:35:25
I've seen just about every vid on youtube until just recently; I've got to say? your explaination is about the best one going!! BTW, nice mill!!!

about 36"?
By: trucknut324. on 17 Mar 12, 03:22:18
about 36"?

send me any ...
By: trucknut324. on 17 Mar 12, 03:22:00
send me any questions?

great job? ! hope ...
By: randall holcombe. on 15 Mar 12, 01:37:37
great job? ! hope mine looks and runs this good.

what is the ...
By: randall holcombe. on 15 Mar 12, 00:08:45
what is the distance between the track??

tire size is 5.3 x ...
By: trucknut324. on 13 Mar 12, 15:09:20
tire size is 5.3 x 12 i think. band is abut 1.25 wide by however lng you? need it (they custom make them) and 1 tpi. Surplus Center for the pulleys.

Okay. Got a few ...
By: jhaddox2. on 12 Mar 12, 22:45:58
Okay. Got a few more questions and ill leave ya be. What size are the trailer tires and the blade. Also, how much are the blades and where did you find your pulleys to? fit your 1" shafts? Thanks

that would? be ...
By: trucknut324. on 12 Mar 12, 14:00:36
that would? be pretty fast, I would say you would need a 2" at least a 14"

Hey man thats ...
By: jhaddox2. on 12 Mar 12, 05:46:46
Hey man thats pretty impressive. Im kinda confused with all the pulley ratio though. Im in the process of making a? mill myself. Do you know what a good ratio would be if someone only used two pulleys? like a 2" driving a 6". Thanks

id? say about 1100
By: trucknut324. on 02 Mar 12, 13:50:35
id? say about 1100

nice job. my first ...
By: michaelghall. on 02 Mar 12, 03:37:07
nice job. my first peek at the commercially built ones and their pricing made me gag. ? do you know about how much you have in all the parts on this? i bet you saved a bundle.

How to make Homemade Pizza From Scratch - Recipe by Laura Vitale - Laura in the Kitchen Ep. 86
Posted by: LauraVitalesKitchen

Video duration: 1077 seconds
Global video hits: 254247

Toget my iTunes App on your iPhone, iPod Touch or iPad, search for 'Laura Vitale' or 'Laura in the Kitchen' in your app store. To get this complete recipe with instructions and measurements, check out my website: www.LauraintheKitche n.com Official Facebook Page www.facebook.com Twitter: @Lauraskitchen

Related: how, to, make, pizza, recipe, from, scratch, laura vitale, how to make a pizza, how to make pizza, how to make homemade pizza, how to make pizza dough, pizza dough recipe

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Her accent is ...
By: applekrumble. on 24 May 12, 11:52:49
Her accent is confusing me - where is she from??

i was just making ...
By: kkboy13. on 24 May 12, 02:50:12
i was just making the dough when i realized i didnt have the hoot attachment for my mixer, i used the paddle attachment instead and the dough? came out smooth. is it because i didnt have the hoot attachment?

PIZZA!!!?
By: ZakoNah. on 23 May 12, 19:37:30
PIZZA!!!?

yh, i think? tht ...
By: anime10lover. on 23 May 12, 14:48:53
yh, i think? tht too lol

you lost me at ...
By: 19dec1981. on 23 May 12, 07:52:04
you lost me at white pizza and? white pizza

2 tablespoons of ...
By: ThePinkrose33. on 22 May 12, 23:53:33
2 tablespoons of oil is actually half of a 1/4 cup? which is 1/8 of a cup

its funny how it ...
By: kiloSPACEzues7. on 22 May 12, 21:26:08
its funny how it takes about an hour to make something it takes you 5 minutes to? eat

hmm 252,311 views ...
By: DCARA06. on 22 May 12, 18:13:04
hmm 252,311 views I'm responsible for at least those last 11. I've made this dough twice. This last batch got too much salt but still delicious and I LOVE how easy the dough is to use. Makes me feel like a pro. I haven't tried the white pizza yet but it? looks sooo good I will be making that version soon!

lmao, there is like ...
By: ringorrong. on 21 May 12, 18:21:30
lmao, there is like nothing showing?

Am I the only one ...
By: Coselnuss. on 21 May 12, 14:13:02
Am I the only one who? thinks they don't look really delicious? They look so dry and cold somehow

i need a? woman ...
By: MrWiredead. on 20 May 12, 16:48:36
i need a? woman like you

love? watching your ...
By: MrsRichyeJohnson. on 20 May 12, 06:58:12
love? watching your videos...your personality is awesome

does it have to be ...
By: Anna7oo. on 20 May 12, 01:05:10
does it have to be extra virgin olive oil can it just be olive oil?

i love your? videos
By: friendsforever679. on 20 May 12, 01:00:11
i love your? videos

sorry I cant resist ...
By: mckill2007. on 19 May 12, 05:16:12
sorry I cant resist the 4:17 cleavage (shame on? me)...anyway I've always wanted to make pizzas, thanks for this recipe!...

i just? called ...
By: karmaticsatire. on 19 May 12, 02:29:51
i just? called pizza hut.

You can use? ...
By: TheWaterman1000. on 17 May 12, 23:58:54
You can use? spagettie sauce.

wtf am? i watching? ...
By: AlansTips. on 17 May 12, 07:12:48
wtf am? i watching?:(

laura,? i take ...
By: south95carolina. on 17 May 12, 02:11:30
laura,? i take delivery! (;

is that chesse? ...
By: genevieve almaguer. on 17 May 12, 02:08:16
is that chesse? cake in the back

that was awesome! ...
By: merkywave. on 16 May 12, 16:20:33
that was awesome! im going? to try it your way! thank you!

sarcasm?
By: legorules111. on 16 May 12, 14:53:36
sarcasm?

actually, she is ...
By: stupidcupid212121. on 16 May 12, 12:16:33
actually, she is Italian?

This is her? ...
By: MrsMusicandy13. on 16 May 12, 03:54:47
This is her? longest video yet

awesome?
By: aisha65426. on 15 May 12, 12:14:52
awesome?

PARABOLIC DISH MIRROR PARABOLOID HOMEMADE SOLAR CONCENTRATOR
Posted by: GREENPOWERSCIENCE

Video duration: 598 seconds
Global video hits: 217767

www.greenpowerscienc e.com PART 1 OF THE DIY PROJECT. SCRAP 70 GALLON WATER TANK I FOUND ON THE SIDE OF THE ROAD.

Related: solar, power, heater, sun, parabolic, concave, mirror, green, enery, alternative, array, parabola, gadget

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Hey Dan, is there a ...
By: charronfamilyconnect. on 05 May 12, 02:16:15
Hey Dan, is there a way to store the thermal? heat/energy generating from concentrating the suns rays with a parabilic dish/lens. Have they invented a way to store this energy for further use by using that stirling engine/ Generator, and a deep cell or hydrogen cell ? Thanks!

Does the vapor that ...
By: oldguyfromcalifornia. on 15 Apr 12, 16:06:11
Does the vapor that escapes through the jar top rise to the surface and escape into the air anyway? I hope this idea can be upscaled. I'd like to put all my trash in a big giant glass garbage can and drop it in the pool and turn it into trash and heat my pool at? the same time. Is that possible?

seria bueno? que ...
By: miguelagos777. on 08 Apr 12, 04:00:45
seria bueno? que estubiera en español

Toxic fumes can ...
By: FresnelParabolic. on 03 Apr 12, 02:51:22
Toxic fumes can make you turn GREEN if you or wildlife inhale? them. So I guess? it is.

Or why not jsut use ...
By: FresnelParabolic. on 03 Apr 12, 02:48:02
Or why not jsut use a satellite dish??

@JoshuaJames Me too ...
By: iverconi27. on 02 Mar 12, 12:53:30
@JoshuaJames Me too. Its cheap compared to other products available online. Its proven system shows an exact instructions on how to make your own solar panels. My electric bill was slashed by 50% on the amount of my previous bill.? Isnt great?Anyway, I think you got the site name spelled wrong. That should be: GreenEnergyNow.info

Will aluminized ...
By: teharley69. on 17 Jan 12, 01:01:45
Will aluminized polyester (like emergency blankets are made of) work to mirror a surface? ?

@GREENPOWERSCIENCE ...
By: superdave54811. on 23 Nov 11, 05:50:13
@GREENPOWERSCIENCE More? POWER to you sir! I just made a comment to @MrCommonsense about the whole CO2 comment he made. I did the research on CO2 and the whole GREENHOUSE GAS GARBAGE. I know that water holds around 2 times the heat energy than any gas on Earth. I keep shaking my head at how many people also never consider that the Earth has cycles of hot and cold. Ice ages and warmer ones. You will find that life thrived here on Earth during warmer times. So what is all the fuss about?

Couldn't you just ...
By: kendigjl. on 07 Jun 11, 09:11:36
Couldn't you just lay a thick sheet of plastic over the inside of the water heater and? heat it up until it softens and melts to correct shape?

i couldn't find the ...
By: hknboss. on 31 May 11, 17:57:12
i couldn't find the part where you? give a parabolic shape a mirror.

im? making one for ...
By: allaroundpro1. on 25 Apr 11, 04:28:23
im? making one for a math project ^^

Where is part 2??
By: claykb. on 07 Apr 11, 20:30:20
Where is part 2??

??????????? ??...?? ...
By: volkodv1. on 29 Mar 11, 06:28:19
??????????? ??...??!!!?

O Jesus, son of ...
By: ahmd1431. on 26 Mar 11, 22:21:54
O Jesus, son of Mary! Is thy Lord able to? send down for us a table spread with food from heaven? jesussonofmary1432.blogspot dot com \=\=\=\

what about if you ...
By: UpNorthLiving2011. on 24 Mar 11, 14:16:19
what about if you used clay molding over the form instead? of concrete? but then again you already have the concrete mold made that will last FOREVER!

plexiglass and a ...
By: prototype9000. on 16 Feb 11, 21:49:35
plexiglass and a heat? gun would work to

nice crotch! ?
By: chiliboy82. on 01 Jan 11, 11:24:34
nice crotch! ?

Nice hair Asian ...
By: kusempinthu. on 14 Dec 10, 09:07:06
Nice hair Asian women lushfmlk.info?

Great movie! Now I ...
By: akamburov. on 04 Dec 10, 00:54:31
Great movie! Now I just need to find that tutorial on homemade-green-high-intensity-lasers and ... voila? ... I'll have my own homemade Deathstar ;)

Free dating ...
By: chathuthushari. on 29 Nov 10, 07:27:59
Free dating guidance for naughty? people benaughtyman.info

because you would ...
By: shaadydog1. on 06 Nov 10, 18:21:45
because you would be using the imperfect side for mirror film that would have the brush and fibre imperfections showing, you want to make the cast so you get the smooth side on the reflection side of the? mirror, not the back side of the mirror.

if he did that the ...
By: satoakimartinez. on 04 Nov 10, 01:45:49
if he did that the concave surface on the final project would be turn out very rough. The whole aim of the project is to make the concave surface as smooth and mirror-like as possible.?

Free Energy is real ...
By: urgencyharviefcem. on 08 Oct 10, 02:26:40
Free Energy is real and its here? but the coverup is strong, if u r interested in a REAL free energy magnet motor then just go to LT-MAGNET-MOTORdotCOM and download the blueprints ,it is probably the ONLY working magnet motor out there. Join the free energy revolution!!

is the bottom of a ...
By: QuaziGNRLNose. on 07 Oct 10, 00:50:52
is the bottom of a water tank really a? perfect parabola?

Lister CS Listeroid Diesel Generator Homemade
Posted by: rocketboy911

Video duration: 208 seconds
Global video hits: 72807

Power Anand Lister 6/1 single cylinder diesel generator. 4400 watts.

Related: listeroid, lister, diesel, cs, homemade, generator

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Our original CS? ...
By: GreyFergy101. on 31 Jan 12, 08:57:58
Our original CS? Lister Start O Matic 2 1/2 KVA is automatic start (which is original). You can see a video of it on my channel. You can start it manually by cranking, also you can start it by flicking a switch on the box or by plugging a electrical appliance in and turning the appliance on which starts the engine up. The alternator/generator doubles up as a electric motor, so it starts the engine and generates. Lister sure was clever! Really great video. :) (its a 1930's Lister, really original)

Looks all good to ...
By: scotjim55. on 13 Jan 12, 23:00:55
Looks all good to me. I can't understand why you would need a S/B generator in florida, is it because of Hurricanes or other bad weather ??

Actually the ...
By: scotty2307. on 13 Jan 12, 08:11:02
Actually the canister muffler works quite well. It doesn't bark. For those who don't know? what I mean by bark, go find a video of a poorly muffled Lister under load and you will understand.

at that speed are ...
By: artcancro. on 23 Nov 11, 00:03:34
at that speed are you producing? a 60 hertz wave or do you not care about the frequency

very nice setup bet ...
By: TheShagall. on 05 Nov 11, 20:56:23
very nice setup bet u cant? stop tinkering with it ? i know i would be at it with the spanners all the time just for fun and so on also nice trolly under it have u more vids of it or any othr sets to show

It actually? sounds ...
By: Lasselkv28. on 01 Nov 11, 14:03:29
It actually? sounds like an older 4 cylinder Toyota diesel engine. Runs great

How long does it ...
By: fullraph. on 28 Oct 11, 22:31:29
How long does it run 1/2 load on a? full tank?

What about? ...
By: medabrundibar. on 25 Sep 11, 19:46:47
What about? controlling the fan speed directly by the coolant temperature? It would be more reliable (pots tend to fail very soon), foolproof and easier for the engine (it would warm up quicker, as the fan would be OFF till it reach minimum operating temperature, without the risk of overheating)...

I was just ...
By: dmeissner777. on 01 Sep 11, 13:15:55
I was just wondering, could this generator, in addition to diesel, run on vegetable oil and/or? methane (from a gasifier)?

what problems might ...
By: R5H4D0W. on 21 Aug 11, 03:32:57
what problems might come up if the coolant temp is too low? engine no0b here, sorry :)?

love it, quiet, a ...
By: R5H4D0W. on 17 Aug 11, 03:46:51
love it, quiet, a lot of history, and from the sound? its just sipping gas

The Main generator ...
By: whorayful. on 23 Jul 11, 07:17:17
The Main generator makes AC current, without special windings built? in it will not spin with DC connected to it, therefore no go as a starter. Even connecting AC to the terminals will not make them spin, I accidentally did this on a 300 kW V12 Detroit Diesel once, a big bang, blown diodes in the alternator, and a damaged regulator, but no spin. bummer.

This is a good ...
By: CMAenergy. on 06 Jul 11, 15:01:25
This is a good stand by for anyone who wants or can't afford a professionally built one. But what is needed before it's to late is clean and free energy. From the only known research for CMAenergy . com Which is not supported by government and authority, Because it will stop totally their income! But we should all be entitled to free energy just as they allow the giving our permits to? the destruction of OUR EARTH!.

Ever considered ...
By: johnyfartpants. on 20 Jun 11, 13:27:06
Ever considered converting it to a modern common rail injection? system to see not only if it could make more power, but also seriously improve the economy?

have you thought ...
By: MrShawn305. on 17 Jun 11, 16:17:09
have you thought about using a temp switch to regulate coolant temp? That way it powers on the fan when the temp hits a point and then powers it off at? another point, all automatically.

wonderful machine, ...
By: lolman2008112. on 14 Jun 11, 19:51:24
wonderful machine, well? done

how easy is to? ...
By: huntinggas101. on 13 Jun 11, 16:15:03
how easy is to? make one

now thats sweet? jim
By: flyfish31. on 09 May 11, 21:29:45
now thats sweet? jim

Nice setup there. ...
By: starlite2991. on 27 Apr 11, 16:51:06
Nice setup there. What kinds of fuel does it run? Do you find it runs most accessories and household items? You talk about? some spare computer parts? What do you mean?

Nice project you ...
By: starlite2991. on 27 Apr 11, 16:48:49
Nice project you got there. What kind of? fuel does it run? Do yOu find it runs most accessories and household items?

how long does it? ...
By: sweatyss. on 08 Apr 11, 21:46:09
how long does it? take to charge one 12 volt battery?

VERY NICELY DONE! ...
By: LtColDaddy71. on 05 Apr 11, 02:04:05
VERY NICELY DONE! However, you have a big 3000kw starter already integrated into the system, I'm curious why you went through all the trouble of having a seperate starter? A gen head should work fine as a motor? to start the engine too...

I built a real ...
By: JacobsElectric. on 02 Mar 11, 18:36:55
I built a real simple automatic/manual shutoff for mine. Using a power door lock solonoid(available at any wrecker). It is temperature activated or I have a push button by the door to the? gen shed. The kids can shut off the Lister without going near it. Very nice project you have there!

Nice Job? man!
By: monstamahadeo. on 08 Feb 11, 08:05:03
Nice Job? man!

excellent!?
By: decoysk. on 17 Jan 11, 03:58:44
excellent!?

Best Homemade Playdough Recipe
Posted by: Schwitt93

Video duration: 278 seconds
Global video hits: 1693597

www.homemadefoodies. com An 8 year old girl demonstrates how to make play dough at home.

Related: play dough recipe, nest play dough recipe, how to make playdough, homemade playdough, making play dough, easy play dough

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Teaspoon ?
By: Schwitt93. on 17 May 12, 17:59:02
Teaspoon ?

wwhats mean of? tsp
By: mmmmmm5078. on 15 May 12, 17:33:23
wwhats mean of? tsp

es plastilina? ?
By: nadiemeconoceylisto. on 15 May 12, 17:22:33
es plastilina? ?

Wow...she cooks ...
By: cindyria. on 10 May 12, 01:47:36
Wow...she cooks better? than half of the teens on Youtube..

so its? green
By: jenika Lao. on 04 May 12, 04:31:24
so its? green

Sorry if this is ...
By: MrLpsfan222. on 03 May 12, 11:15:55
Sorry if this is late, but no you don't.? It just won't last as long. I would use the tartar.

Some kids? just ...
By: JesslynnA8. on 29 Apr 12, 23:30:22
Some kids? just wear them on any finger if it doesn't fit or something. So what?

aww! you're really ...
By: Jenny Poe. on 29 Apr 12, 11:41:49
aww! you're really cute! i love it!?

your daughter is a ...
By: amy ramsden. on 29 Apr 12, 01:14:45
your daughter is a genius ?

so? cute
By: amy ramsden. on 29 Apr 12, 01:10:15
so? cute

Nice music?
By: MrMichael010508. on 28 Apr 12, 23:55:06
Nice music?

yes?
By: jyjsuimnui78i8. on 28 Apr 12, 16:11:19
yes?

no u? can just use ...
By: jyjsuimnui78i8. on 28 Apr 12, 16:10:48
no u? can just use the other ingredients

You don't really ...
By: giantkid03. on 27 Apr 12, 22:28:08
You don't really put? the steps in it which is kinda confusing

Do you have to buy ...
By: FUNtasticCreations. on 27 Apr 12, 10:55:25
Do you have to buy an other pan? in making? clay?

is this? edible???
By: EVI0627. on 26 Apr 12, 20:23:01
is this? edible???

EMMA IS SOOO PRETTY ...
By: sushimama123. on 26 Apr 12, 05:43:51
EMMA IS SOOO PRETTY!!?

cute Emma?
By: princesshana05. on 21 Apr 12, 12:57:43
cute Emma?

THIS TASTES SO BAD?
By: TheMakeUping. on 19 Apr 12, 23:11:23
THIS TASTES SO BAD?

It? is so nice
By: qtequi. on 19 Apr 12, 12:12:30
It? is so nice

Is there a ...
By: LPSandpolish. on 18 Apr 12, 13:00:30
Is there a subtitute for cream of tarter? It is? not available in my region.

your? welcome!
By: MultiREDBEARS. on 18 Apr 12, 00:46:59
your? welcome!

Thank you?
By: Schwitt93. on 17 Apr 12, 19:08:51
Thank you?

Thank you ?
By: Schwitt93. on 17 Apr 12, 19:08:34
Thank you ?

MY SISTER SAID ? ...
By: pinksnipersag. on 15 Apr 12, 06:49:45
MY SISTER SAID ? THAT THE GREEN DOUGH LOOKS LIKE A GIANT V-FRESH OR JUDGE LOL!

Homemade bandsaw 2
Posted by: Matthiaswandel

Video duration: 725 seconds
Global video hits: 93039

woodgears.ca Showing off my improved homemade bandsaw with a laminated wood frame

Related: bandsaw, homememade, wood

Display Video Comments | Hide Video Comments | Add Comment

Latest comments made on this video:

Solid wood only. ...
By: Matthiaswandel. on 05 May 12, 00:30:40
Solid wood only. OSB or plywood have half the grain facing in? the wrong direction, so they aren't as strong.

YOU dont say?
By: thedudewhoiskickass. on 04 May 12, 21:57:29
YOU dont say?

could? i use some ...
By: Harrie151. on 01 May 12, 15:07:24
could? i use some osb boards for the frame

I can't answer that ...
By: Matthiaswandel. on 30 Apr 12, 14:22:45
I can't answer that question for you. I show everything that goes into building it. The other factor is you, and that is something I can't answer for? you.

dude you're genius ...
By: TheTrackformer. on 30 Apr 12, 13:57:32
dude you're genius!? du bist aus deutschland, richtig? :) i cant spend much on a bandsaw but i really need one for my instrument-building project. my question is: can this? bandsaw be built by anyone by following the instructions and is it safe enough for an amateur to built and use?

Hmm I wonder if you ...
By: Ltb0b. on 07 Apr 12, 13:06:54
Hmm I wonder if you can use it on metal by changing its blade and speed :o I? wonder how the wood would hold up :D Amazing bandsaw sir!

I agree that you ...
By: LukeMcMullin. on 30 Mar 12, 19:29:56
I agree that you are a genius, I want to buy and build your bandsaw. I did wonder about being able to build it as a 18 or 20" I am? interested to know if I will have to add a few laminations to compensate for the additional tention to the frame etc. What are your thoughts is it possible? Or better to just follow your plans for the 16"?

Sei? un artista....
By: mariotriolo. on 21 Mar 12, 16:14:20
Sei? un artista....

The plans already ...
By: Matthiaswandel. on 08 Mar 12, 02:24:43
The plans already have allowances for lumber up to 19? mm.

I'm so glad I ...
By: MegaMikeyn. on 08 Mar 12, 01:39:43
I'm so glad I bought these plans!? And thanks so much for including the Sketchup model; I can only get 19mm timber instead of 16mm so I am tweaking the model to allow for that and see what parts need to be modified, then regenerating the dimensioned drawings. You've put so much work into this, I can't believe they only cost about AU$20. Cheers! :)

yesss. and to make ...
By: benhuff0. on 14 Feb 12, 14:53:44
yesss. and to make it specifically out of readily available wood stock and parts. you're like ben franklin, man. i'm sure canada has a great benevolent inventor who is you're ben franklin. in that case, you are? like him.

Hi Matthias. Just ...
By: LoomisRex. on 19 Dec 11, 13:38:35
Hi Matthias. Just bought your? plans for the bandsaw after watching the video. Very nice :) Thank you :)

hola ., amigo mi ...
By: 1000gastelu. on 01 Dec 11, 02:18:15
hola ., amigo mi nombre es nicolas fernandez , soi de atacama chile te escribo por que quede facinado con tu trbjo y en lo cual me desempeño? como tornero en madera y me hace falta una sierra sinfin ,. por lo tanto te escribo para que si hubiera la posibilidad de que me podrias enviar los planos mas detalladamente ya que en el video no se ven adecuadamente y muy borroso muchas gracias amigo por tu aporte hasta luego y q subas fabricaciones hasta luego y mi correo es gastelu_61@hotmail.com gracias

I have just? ...
By: EyeOnTheTV. on 13 Oct 11, 01:22:22
I have just? decided. When I have a house with space for a shop, I'm making my own band saw, and I'll be using Matthias's plans.

You are a? freaking ...
By: imautuber444. on 11 Aug 11, 22:41:00
You are a? freaking genius, I bow before you !

Pure? genius.
By: electricdrjoe. on 03 Jul 11, 17:47:03
Pure? genius.

The satisfaction ...
By: Blackwido11. on 02 Jul 11, 00:12:12
The satisfaction that comes with building your own tools must be? great!

Practical thinking ...
By: erxzy. on 06 Jun 11, 19:06:16
Practical thinking !!!?

We have a small ...
By: littlestworkshop. on 29 May 11, 21:54:29
We have a small DeWalt bandsaw at work but I don't have a saw at home, when I compare the performance of your saw to the DeWalt it seems the smart option is to build a saw not buy as? it is pretty horrible to use and very noisy.

Exactly. They also ...
By: Matthiaswandel. on 29 May 11, 19:49:05
Exactly. They also prevent the horizontal members from twisting? (there's a fair bit of torsional load on them because the wheels are offset from the beam)

I feel sure the ...
By: littlestworkshop. on 29 May 11, 17:06:42
I feel sure the stiffness of your frame has a lot to do with the diagonal? gussets, they are in compression so will barely flex, that leaves only a short length in the middle to really bend and as you mentioned it is nice and thick.

I spent about $100, ...
By: Matthiaswandel. on 29 May 11, 02:58:48
I spent about $100, but I used a lot of junk I had lying around. It totally depends no what prices you end up paying for? the parts. So I can't really estimate your cost.

Just came? across ...
By: jerry020351. on 28 May 11, 15:56:09
Just came? across your plans and WOW!!! what a great set of plans. I'm going to purchase your plans. What I would like to know and I have not read all the comments, is do you have a total cost of this project??

Anywahere from 16? ...
By: Matthiaswandel. on 26 May 11, 13:29:12
Anywahere from 16? to 19 mm will do. The plans make allowances for that. Mine is 16 mm, because I started with different leftover lumber that I planed down to the same thickness.

What size is the ...
By: guerd87. on 26 May 11, 10:43:46
What size is the timber in the frame? I dont have? access to much machinery for dressing materials. I can easily buy something like 90x19 or 70x19 Dressed pine. Is this suitable for the machine frame?

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

acne treatment Videos

Search Box

acne treatment Related Videos

Latest Health News!

acne treatment Sponsors